Saiga 12 DIY project complete [w/ notes and pics]

I’ve had a Saiga 12 for a well over a year now but hadn’t gotten around to doing the trigger group/pistol grip conversion.   After reading Linoge’s posts about his recent acquisition: Vera (and my correct guess as to its identity thus allowing him to share it with the world), my interest to see the project through was rekindled.  I ordered parts from Carolina Shooters Supply and used the Saiga 12 forum discount code to get 5% off.   Props must be given to CSS; the parts were ordered in the late afternoon on a Friday and were shipped the same day.  CSS also has helpful videos on how to go about the procedure once the parts are in hand.

This was not the first S-12 conversion I have performed.  The first was for a buddy whose girlfriend asked me what gun-thing she should get for his birthday last year.  I told her about the kits and told her I would perform the surgery so she could surprise him.  Upon receiving it, he of course instantly realized she was a keeper and married her.  Of course, having his gun to practice on helped and my conversion was easier and faster.  I also learned in between that I wanted a AR stock adapter for mine.  My buddy’s kit came with a K-Var polymer stock with a steel buttplate.  Being the sort to perform my due diligence before turning over the gun to said buddy, I ‘function tested’ it with 50 rounds of high brass birdshot.  [Warning: incoming exaggeration] The sensation of doing so can accurately be replicated by placing a can of Spam again your shoulder, lid towards you, and having someone repeatedly smack it with a sledgehammer.  Also learned from the first build was that while I like the Ergo grips on my AR’s, the Ergo AK grip placed my hand too low and thus my finger too low on the trigger to be comfortable.

My friend’s Saiga 12 that I got to practice on

For my build I used the CSS trigger guard and trigger kit with a Hogue AK grip, a CAA AK aluminum stock adapter and Magpul MOE stock.  Addtionally I added the V-plug from MD Arms for gas port regulation.  Just for additional CDI factor, I added a DPH Phantom Flash Enhancer.  Funny thing, the muzzle device didn’t look that big on the webpage…

Phantom Flash Enhancer for Saiga 12

The major lesson learned this go around (and what really helped speed the project) was learning how to properly use a cobalt drill bit.  A small thing yes, but important: Go slow.  Don’t get anxious once the bit starts biting into the steel and go full throttle.  You will burn the bit causing it to lose its temper (literally) and it won’t cut ever again.  There, four dollars and time saved.

I’m also glad I got the Hogue grip.  It did require fitting in order to be placed forward enough to seat the attachment screw, but comfort and hand placement is much improved compared to the Ergo AK grip.  The CAA stock adapter required judicious amounts of filing and fitting to attach mostly due to the head of rearmost triggerguard screw.

So how did it turn out?  Have a gander.

mostly converted at this point; did you know a MASH clip fit the hole in the tang nicely?

Completed S12 DIY project ready for testing

With everything finally fitted and secured with locktite, I ventured out for a function test yesterday with 25 rounds of Winchester Super Speed birdshot and 30 rounds of Winchester Super X buckshot (2 3/4″ 9 pellet OO buck).  After getting the gas port set, it ran like a top using 10 round magazines from AGP.  Next outing I might try a drum from MD Arms.  My shoulder has convinced me to add an extended recoil pad too.  I’m interested to see how well the MOE stock holds up to repeated use and I’m also considering adding some sort of top rail (any recommendations?) with a Primary Arms micro RDS.

Best of all, as I was cleaning up another shooter came over to mention that the range is having an Action Shotgun match Sunday morning!  Guess where I’ll be.  What better way to build my own familiarity and competence with the platform and test its reliability than to run it in a match?  All in all, even though it’s not nearly as cool as Linoge’s, I am quite happy with my Saiga 12 and am looking forward to more fun with it.

FCC notice: Nothing comes for free and certainly not all the stuff I bought to complete this project.

3 Responses

  1. Welcome back

  2. It looks like someone’s ready for the zombies.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 30 other followers

%d bloggers like this: